Smoke Photography x2

I decided i wanted to try and take some more photos of smoke, but this time using specific videos projecting through the smoke. I found a video on YouTube which worked well for what i was trying to achieve, however because it was one block colour, it didn’t allow for any difference in the smoke shapes that were created.

This was the first video i used, but none of the photos were strong enough to use with my work. the incense was also flowing and rising too quickly to photograph, as a result, most of the images quality was too poor to do anything with.

0160761e6956ff37f86e31abe3514c623a45dbf079_00001

above is an example of one of the images that didn’t work with this video. The fact that the smoke is full green was not what i was trying to achieve. I was hoping that the in-between changes of the colours on the video would add more colour to the smoke. so instead i found a different video which used a lot of colour and tried again.

This is the second video i used which worked well with the photos, as seen in the images below. It gave a northern lights effect, especially when the smoke started rising and twirling around slowly.

Print Compositions

The first piece i created is based off the pattern of the print that i was using to create the artwork. I followed the pattern of the lines on the lino for the composition. I was going to fill the piece, but i realised that the piece looked better without filling the paper.

File_004

The second piece that i created i based off of the rule from the natural system “head towards the centre”. i placed the prints in a spiral position and i think it worked in regards to the rule that i was basing the piece off of.

File_003

Prints

I began to create lino prints to fill out my body of work after finishing my sculpture.

The prints were inspired by the black and white drawings i created with tipex. The first lino i created (seen below) worked well, but did nor give the overwhelming effect like previous sketches. This was due to the lack of lines that i cut and because i only cut 3 lines, the print seemed to look more like a “logo” rather than a representation of a murmuration. This was due to the fact that the lino cutter i was using was not thin enough. So i created a tool that could cut the fine lines that i was trying to achieve.

The image seen below is the original print, after adding the thinner lines.

IMG_1625

IMG_1628

IMG_1624

After creating the last print (seen above) i began playing with compositions on paper and decided to create work with the prints based off the patterns and rules of the natural system.

Sculpture

I had been through many different ideas for my sculpture. I initially wanted to create a sculpture with the birds hanging in a form that would represent the shapes and patterns of the murmuration. I was going to make a mobile type sculpture that would rotate to create different shapes every time. My estimate for the amount of bird i would need was 50 birds. However, as previously stated, the casting didn’t began getting more difficult and i only ended up with 31 birds (32 including the first prototype).

After debating the sculpture for a while, and speaking to the tutors and other people in my studio, i decided i wanted to make a sculpture that was more controversial to my theme.

We talked about placing them all on the floor upside down to contradict the system. However, i decided to place the birds in a cage, some still hanging but a majority of them placed on the bottom, as if the rules that they follow have been intercepted due to the cage. The cage plays a “puppet master” role with two bamboo sticks crossed over the top, which were initially placed there to stop the mesh i used from stretching but played a bigger role in the sculpture than i originally intended.

IMG_1373IMG_1374IMG_1375

I used a plastic mesh which i found in the garden of my student house, and cut out 8 pieces to the same size (30cm x 30cm) and hot glue gunned the sides together.

I glued 5 sides together, attached the bamboo sticks and then began hanging the birds, this was a difficult process due to the weight of the birds making the sculpture sag.

This can be seen below. To photograph the work in progress, i had to use a piece of string to hold the sculpture together so i could get a good photo of it.

IMG_1645IMG_1646

Artist Research

For this artist research i decided to look at different ways artists use cages in their work.

Contemporary Sculpture " Hand In The Cage " 1

For this piece, it is not stated who it has been made by and is advertised on a collectors furniture website, however i think the idea behind it is interesting.
https://www.1stdibs.com/furniture/wall-decorations/contemporary-art/contemporary-sculpture-hand-cage/id-f_834911/

This is an installation by Jeppe Hein called ‘Cage and Mirror’. This is an interactive installation, meaning that viewers can actually enter the cage and experience the installation first hand. There is a large circular mirror that rotates placed in the centre to create and optical illusion as the guests walk around the inside of the cage.

A video in the link below shows guests walking around the installation to show you how the mirror works with the cage.

http://www.trendhunter.com/trends/cage-and-mirror

 

This is a kinetic sculpture made by Hobart Ray Brown called ‘Emily’. The artist made this piece for his daughter Emily and it is a kinetic sculpture made out of metal in the form of a hamster cage. It is currently for sale on a vintage’s website. During its time its home was in the Hobart Brown kinetic sculpture museum and gallery in California. Although this piece is very different to what i am going to create, it is still quite interesting and i love the shapes of all the different sections, the fact that it is an animal cage gives it more character.

https://www.rubylane.com/item/862876-CS-172/Hobart-Ray-Brown-American-1934-x962007

 

 

 

 

 

 

 

 

This is an installation by Sara Jimenez from Anonymous Contemplations during the Final exhibition on the television show “Work of Art”. The cage was found in the streets of New York. There are 100 birds that are exiting the cage and are made out of paper using origami. They are used to symbolise setting secrets free. I love this piece, the message behind it is powerful and the layout with the way that she makes them look like they are rising to the ceiling is a beautiful visual illusion. I love the fact that the artist chose to keep everything white in connection with the peaceful theme of freedom.

 

This is a sculpture by Marguerite Derricourt called ‘Bird Cage’ and is made out of Wire and copper. This sculpture is interesting because the birds around the outside of the cage, when viewed on the photo, make it look like the birds are flying about inside of the cage. This is a similar illusion that i am trying to achieve with my sculpture but with hanging the birds inside and trying to make the movement visible without actually having to be moving.

http://www.margueritederricourt.com/gallery.html


In 2009, Michael Thomas Hill created ‘Forgotten Songs’. It is an installation of 110 empty birdcages surrounded by speaker that play bird calls. The bird calls are from some of the birds that used to be resident in Sydney but are now gone due to urbanisation of the area. Due to the popularity of the installation, residents demanded it be a permanent feature of the area, so the artists swapped the cages for 180 new rustproof cages and still features the bird calls.

http://www.mymodernmet.com/profiles/blogs/michael-thomas-hill-forgotten-songs

Black & White

Whilst creating sketches and drawings throughout my major project, i had been primarily creating work on white paper with black dots to represent the birds. However, after finding some black card, i decided to create some small line drawings. the aim was to create them to capture the flow of a murmuration.

I began trying with acrylic paint and watercolours, but it didn’t give the vivid effect i wanted so instead i used a correction marker (tipex pen)

I noticed the similarities the drawings had to smoke. The way that smoke rises and flows was similar to the movement and patterns created during a starling murmuration.

Spiral painting

Whilst spray painting the resin birds, I decided i wanted to create a piece during this process, as i had an idea for a painting. I decided to place the birds in a spiral position on the paper and then spray painted through them with a Matt Black Montana 94 spray paint can.

I based this painting off of one of the rules that a murmuration follows; head towards the centre. What i believe worked best with this piece is that, due to the fact that the resin birds only touched the paper in certain places, the spray paint dust went underneath the figure slightly, but created the lighting effect on the birds, which can be seen in the photo above.